September 9, 2022

Millions of traffic accidents occur each year as a result of failure to pay attention to tyre safety. Even if you have the greatest brakes available, if your tyres have deteriorated, it won’t help. The goal of braking is to create enough resistance between the road surface and the tyre to bring the car to a complete stop. When tyres become worn, there is insufficient friction and the tyre slides across the road surface, failing to stop the car. This is also true in terms of steering and stability. So, if you want to be safe on the road, read on and remember the following tyre safety recommendations.

Routinely Monitor Tyre Pressure:
Tyres lose pressure with time, therefore you should monitor them at least once per month. Operating with slightly deflated tyres is risky since it impairs your car’s handling, reduces fuel efficiency, and can even cause tyre damage. On the other hand, driving with underinflated tyres is just as dangerous. Your tyres will not only have less traction and touch with the ground, but they will also burn out faster and have an increased chance of exploding.

​​Examine Your Tyres For Baldness:
It’s time to get new tyres if the tread depth on your current ones is less than 1.6mm. Check the tread depth with a tyre depth gauge or place a cent into each tread groove. Bald isn’t attractive when it comes to tyres. In reality, driving with bald tyres is quite dangerous, especially in wet circumstances. The hydroplaning danger increases with worn tyres, for ignorant individuals. Bald tyres are also much more readily punctured, resulting in a blowout, and you will have a more difficult time breaking your car.

Avoid Uneven Wear by Rotating Your Tyres:
Your front and rear tyres degrade unevenly, in case you didn’t know. The front tyres, for example, bear the majority of your vehicle’s weight and will wear out more quickly. Your tyres might be worn down differently depending on how many rights and left turns you make. By rotating your tyres, you will not only have a better and smoother ride, but you will also save dollars by extending the life of your wheels. Incorrect inflation, suspension misalignment, and misaligned wheels are all possible causes of uneven wear. Uneven wear is a serious issue that must not be overlooked.

Closely monitor your vehicle’s alignment:
Long-term use, holes, or simply a terrible kerb bump can cause your car to become misaligned. This will result in uneven tread wear and impact your car’s control. Look for the following signs to see whether your car is out of alignment:

⦁ Treadwear is uneven;
⦁ Automobile swerving left or right;
⦁ When going straight, your steering wheel becomes off-centre;
⦁ The vibrations in your steering wheel are noticeable.

Replace Them if You See Any Cracks, Bulges, or Blisters:
Your tyres, like your skin, should be devoid of cracks, bulges, and blisters. When any sidewalls of your tyres seem fractured, they might have been harmed by road conditions, incorrect inflation, overloading, or kerb abrasion. Bumps and blisters are indications of tyre structural degradation. Since these signs might indicate tyre failure or a blowout, you should have them examined as quickly as possible.

Auto Super Shoppe Albany can easily execute all of the necessary car safety inspections to guarantee that your vehicle is safe and running at its best.